proflow

proflow mechanical

Industry 4.0 (IOT) in temperature control and cooling - electronical fl ow measurement

Process data measurement and process control on highest level and nearly maintenance-free

Following the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow mechanical - as a replacement for the current and widely used standard measuring variant with impeller or turbine - now makes mechanical measurement according to the differential pressure principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. A completely non-contact flow measurement based on the ultrasonic principle is available with the proflow ultrasonic.

 

  • Robust flow measurement in consumer return line
  • PT 1.000 temperature measurement in consumer return line
  • No inlet / outlet sections required
  • 6 x 2 consumer channels 3/4“ female screw thread
  • 1 x 2 main connection 1“ female screw thread
  • Available in three temperature variants:
    operating temperature up to 100°C, up to 160°C and up to 180°C
  • Max. flow rate each channel:: 25 l/min or 50 l/min
  • Max. temperature: 100°C / 160°C / 180°C